Legrand RC7AM2TCBK Bedienungsanleitung PDF herunterladen

RC9AM2TC & RC7AM2TC

Poke-Thru Series

INSTALLATION INSTRUCTIONS

Installation Instruction No.: 1 003 168 – June 2003

Step 1 Layout and locate position of hole(s).

Step 3 Core drill hole. Step 4 Stem Assembly. Catalog Nos. RC9AM2STC.

Insert Stem into Hole.

Step 2 Remove 6 1/2" [165mm] section from carpet or tile.

Use template provided.

CAUTION: Holes shall be spaced a minimum of 2' [610mm] on

center and not more than one hole per each 65 sq. ft.

[6 sq.m] of floor area in each span.

Push Down

CAUTION: Be certain to drill hole at least 4" [102mm]

from any wall or pillar to leave enough

room for Poke-Thru cover assembly.

NOTE: For tile thickness greater than 3/4" [19.1mm]

consult factory.

CAUTION: Poke-Thru device cannot be rotated

in hole after insertion into floor.

Walker

electrical systems conform to and should be properly

grounded in compliance with requirements of the current National

Electrical Code or codes administered by local authorities.

All electrical products may present a possible shock or fire

hazard if improperly installed or used. Walker electrical products

may bear the mark as UL Listed and/or Classified and should

be installed in conformance with current local and/or the National

Electrical Code.

Products Covered:Cat. No. RC9AM2TC, RC7AM2TC, RC9AM2STC, RC9CM2TC, RC7CFFTC

CAUTION: DO NOT operate tile stripper or resurfacing equipment over top of covers.This may result in damage to the surface finish

of the product.

IMPORTANT: Please read all instructions

before beginning.

24" [610mm] Min

Center – Center

6 1/2"

[165mm] Diameter

3" Diameter Core Drill

3 1/16" [78mm] Actual Diameter

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - Poke-Thru Series

RC9AM2TC & RC7AM2TCPoke-Thru SeriesINSTALLATION INSTRUCTIONSInstallation Instruction No.: 1 003 168 – June 2003Step 1 Layout and locate position

Seite 2

Disposable Plate(removed)Mounting ScrewsCarpet/TileFlangeThreadedReducing RingStep 5 Cover Assembly: Catalog No. RC9CM2TC. Removedisposable plate and

Seite 3

Mounting ScrewsCarpet/Tile FlangeRC7CFFTC Cover Assembly comes with this receptacle shell,intumescent insert, and 2 screws.Discard these items when us

Seite 4

The RC9AM2TC and RC7AM2TC Series Poke-Thru Devices are UL Listed and Classified toU.S. and Canadian safety standards to the following conditions: The

Seite 5

NOTES

Seite 6 - Carpet Cutout Template

The Wiremold Company U.S. and International: 60 Woodlawn Street • West Hartford, CT 061101-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-2

Verwandte Modelle: RC7AM2TCGY | RC7AM2TCBS | RC7AM2TCAL | RC9CM2TCBK | RC9CM2TCGY | RC9CM2TCAL | RC9AM2TCBK | RC9AM2TCGY | RC9AM2TCAL | RC9AM2TCBS | RC9AM2STC | RC9AM2TC |

Kommentare zu diesen Handbüchern

Keine Kommentare

Legrand RC7AM2TCBK Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Legrand RC7AM2TCBK herunter. Legrand RC7AM2TCBK User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: RC7AM2TCGY | RC7AM2TCBS | RC7AM2TCAL | RC9CM2TCBK | RC9CM2TCGY | RC9CM2TCAL | RC9AM2TCBK | RC9AM2TCGY | RC9AM2TCAL | RC9AM2TCBS | RC9AM2STC | RC9AM2TC |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Legrand RC7AM2TCBK