Legrand Walkerflex Modular Wiring System Bedienungsanleitung PDF herunterladen

Walkerflex

Modular Wiring System

I N S T A L L A T I O N I N S T R U C T I O N S

Installation Instruction No.: 1 006 507 R6 – Updated August 2011

Wiremold electrical systems conform to and should be properly

grounded in compliance with requirements of the current National

Electrical Code or codes administered by local authorities.

All electrical products may present a possible shock or fire

hazard if improperly installed or used. Wiremold electrical products

may bear the mark as UL Listed and/or Classified and

should be installed in conformance with current local and/or the

National Electrical Code.

IMPORTANT: Please read all instructions

before beginning.

roducts Covered: FCA, NWC, NCS, NCW, NCBS, NPA, NDU, RECDU, CAP3456, CAP810, LDU, LWC, LPA, LCBS,

LCW, WWC, WCS, WCW, WPA, WCBS, WDU

NOTE: Label on product indicates which products are suitable for use in air handling spaces in accordance

with Sec. 300-22(C) of the National Electric Code.

1. Each Walkerflex

component contains a unique connector

key and color indicating rating, conductor location and

orientation. Only like color keys can be mated. See Key

Configuration and Color Chart for available options.

2. Each Walkerflex

key is comprised of one or more

configurations that determine the number of line and

neutral conductors. Only identical configurations can

be mated. See Key Configuration and Color Chart for

available options.

3. Disconnect power from source prior to wiring any Walkerflex

component into building’s electrical power system.

4. Installer to determine maximum cable length based on wire

gauge and circuit load.

5. Installer to ensure adequate overload protection based on

system key, rating and circuit load.

6. Refer to appropriate Wiring Diagram and System Key

Configuration Conductor Location Chart for field connections

of Cat. Nos. NWC/LWC (Wire Connector) and NCW/LCW

(Cable Whips). Refer to wiring diagram supplied with NDU/LDU

(Distribution Unit) for field termination.

7. Securing and Supporting of Cables and Components: Refer

to NEC Article 604, Manufacturing Wiring Systems and any

local codes.

8. Cap all unused connector openings with Cat. No. CAP3456

(for 3 through 6 wire system) or Cat. No. CAP810 (8 and 10

wire system).

9. 277V Walkerflex components are only available in 3-6 wire

configurations.

10.The Walkerflex system is compatible with the Convia enabled

Walkerflex system of the same configuration and key.

Cat. No. NCS/LCS/WCS

(Cable Set)

CAP3456/CAP810

(End Cap)

Powe

Power

Connected to

Protected Circuit(s)

Secure Box

in Place

NOTE: Cap Unused Connectors On

All Power Out Modules.

NDU/LDU (Distribution Unit)

wer

Power

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - Walkerflex

Walkerflex®Modular Wiring System I N S T A L L A T I O N I N S T R U C T I O N SInstallation Instruction No.: 1 006 507 R6 – Updated August 2011Wi

Seite 2

2Access Floor BoxTYPICAL PREWIRED ACCESS FLOOR BOX INSTALLATIONSCat. No. NCS(Cable Set)Cat. No. NCS(Cable Set)Cat. No. NCW(Cable Whip)Cat. No. NPA(Pow

Seite 3 - ALKERFLEX SYSTEM ACCESSORIES

3WALKERFLEX SYSTEM ACCESSORIESRC4ATCAL222PA C6STCP222PA AV3ATCAL111PA 4FFATCAL422CWCRFBAC2111PAAF2KC2111PAAC8104YC2111PASAFKC2111PAEFB6S EFB8SEFB10SEF

Seite 4 - L1 Black

4120V 20A SYSTEM FOR 1, 2, 3 OR 4 LINE CONDUCTORSCONNECTED TO A GROUNDED THREE-PHASE WYE120V 20A SYSTEM FOR 1 OR 2 LINE CONDUCTORSCONNECTED TO A DUAL

Seite 5 - (continued)

5WALKERFLEX SYSTEM WIRING DIAGRAMS (continued)120V 20A SYSTEM FOR 4 LINE CONDUCTORS & 2NEUTRALS CONNECTED TO AN ISOLATED GROUNDTHREE-PHASE WYE120V

Seite 6

6TERMINALBLOCK SYSTEM COLOR KEY POWER OUT POWER IN20A, Black 422120V,4H/2N/IG20A, Orange 442120V, 4H/4N/IG20A, Natural 332120V, 3H/3N/IG20A, Blue

Seite 7 - BLOCK WIRE WIRE WIRE

7WALKERFLEX SYSTEM WIRING CONFIGURATIONS (continued)CONDUCTORLOCATIONCONDUCTORLOCATIONCONDUCTORLOCATIONHN GTERMINAL BLOCK WIRE WIRE WIRECOLOR KEY CONF

Seite 8 - WIREMOLD

WIREMOLDU.S. and International: 60 Woodlawn Street • West Hartford, CT 061101-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-233-6251 Canad

Kommentare zu diesen Handbüchern

Keine Kommentare

Legrand Walkerflex Modular Wiring System Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Legrand Walkerflex Modular Wiring System herunter. Legrand Walkerflex Modular Wiring System User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Legrand Walkerflex Modular Wiring System