Legrand SPDU8-1U User Manual Bedienungsanleitung PDF herunterladen (Seite 13)

5.3 System Access Setup Menu

• System(Device) name: Assign a system name, sometimes

referred as site or device name.

• Date and Time: Enter calendar date and real-time clock.

• Serial Port Mode: Configure the Local Master Port to

interface type: either to a serial RS-232 port on your work

station or an external Modem device. An external Modem

device is typically equipped with a DCE (Data Communication

Equipment) terminal connector. Since the system's Local

Master Port and Modem device ports are not complementary,

you need to use a NULL Modem cable with both male

connectors. For information about connecter pin assignment,

please see Appendix A.

• Modem Startup String: Define an external Modem control

command string that is sent from the system to an external

modem device periodically (in every 15 minutes). If you do not

need to define the control string, leave the entry field empty.

• Web Access: Enable or disable web access to the system.

Default to enable.

• Telnet Access: Enable or disable Telnet access to the system.

Default to enable. Only one active Telnet session is

permissible.

• Enable Telnet Anonymous User: Enable or disable an

anonymous user's access to Telnet port.

• Control command via Emails: Enable or disable this access

method. When it is enabled, you need to make sure you also

have completed POP/SMTP server and email receiving and

sending addresses. See “TCP/IP Network Configuration”

setup menu for detailed information how to setup email

accounts. Default to disable.

• SNMP Agent Enabling: Enable or disable SNMP agent

on the system. If the system SNMP Agent is enabled, it

collects and stores management information and makes

this information available to NMS using SNMP. Please see

Section 2.5 for a list available MIB objects that the system

supports. Default to disable.

• SNMP Trap Enabling: Enable or disable Trap sending. If this

option is enabled, Traps are sent if there is a power reboot

command execution on the system. Default to disable.

Note: You must enable the above SNMP Agent setting.

Otherwise, enabling Trap setting will not take effect.

• SNMP Trap Receiver IP Address: Enter Trap Monitoring

receiver IP address.

• SNMP Community String: To specify SNMP MIB/Trap

community string. The default string is “public”. This

string is used for public, private and Trap.

• Current Alarm Threshold: To defined AC current draw

alarm threshold. The unit is Amps.

• Alarm Email Notification: Enable or disable Email alarm

sending method.

• Alarm Notification Interval (Minute): Define alarm notification

sending interval.

• Save and Quit: Save current configuration data and return to

previous configuration menu.

************************************************************

* *

* System Access Setup *

* *

**************** ********************************************

> 1) System(Device) name...............Undefined

2) Date(mm/dd/yyyy)..................03/07/2007

3) Time(hh:mm:ss)....................00:58:36

4) Serial port mode............. .....Console

5) MODEM startup string..............ATE0M0Q1&C0&D0S0=1

6) Non -Admin user restriction*(Y/N)..N

7) Web access (Y/N)..................Y

8) TELNET enable (Y/N)...............Y

9) TELNET timeout(max 655 35 minutes).10

10) TELNET anonymous user (Y/N).......Y

11) Command control via email(Y/N)....N

12) SNMP agent enable(Y/N)............N

13) SNMP Community String ............******

14) SNMP Trap (1 -on 0 -off).......... ..0

15) SNMP Trap Receiver IP Address.....

s) Save.

q) Quit.

***Note for 6): for controlling non -Admin user's access to system

data.

>Please enter your selection:

Figure 17 - System Access Setup Menu (Terminal Screen)

Figure 18 - System Access Control Menu (Web Page)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Kommentare zu diesen Handbüchern

Keine Kommentare

Legrand SPDU8-1U User Manual Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Legrand SPDU8-1U User Manual