Legrand CSU Series 32 kHz Bedienungsanleitung

Installation InstructionsCSU Series32kHzUltrasonic Occupancy SensorsSyracuse, NY 13221-4822800.223.4185www.passandseymour.com

ORDERING INFORMATION• All sensors available in white.Catalog # DescriptionCSU600 360° one-sided, 32kHz Ultrasonic Occupancy Sensor,up to 600 sq ft cov

SPECIFICATIONSVoltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P.O. Box 4822, Syracuse, NY 13221-4822Technical Support: 800.223.4185 • www.passandseymour.com340785 Rev. B 07931

UNIT DESCRIPTIONThe Pass & Seymour ultrasonic occupancy sensors operate on 24VDC and automatically turnlighting systems on and off based on occupa

UNIT PLACEMENTPlacement of ultrasonic sensors is critical for proper operation. It is best to place the sensor so thatit has a clear view of all deskt

NutWasherThreadedInsert7/8" (22mm)holeCeilingTileRotateclockwiseCeilingScrews:103mm (4.1") apartSpace:3mm/(1/8")Visit our web site at w

WIRING DIRECTIONSSensor wiring:BLUE wire from power pack to BLUE wire from sensor.RED wire from power pack to RED wire from sensor.BLACK wire from pow

Sensitivity and Time Delay adjustments are both made under the sensor’s front cover. Insert asmall flat-blade screwdriver in the slot of the front cove

15 seconds4 minutes6 minutes8 minutes10 minutes12 minutes14 minutes2 minutes18 minutes20 minutes22 minutes24 minutes26 minutes28 minutes16 minutes30 m

TROUBLESHOOTING• Check that wiring connections are correct and secure.• Make sure that the line voltage is +/- 10% of rating.Lights do not turn off af

Lights do not turn on, even with motion in the room, and…... the red LED does not flash (does not sense motion):—Make sure the circuit breaker has been