Legrand AL2000 Small Aluminum Surface Raceway Bedienungsanleitung PDF herunterladen

AL2000 RACEWAY WIRE FILL CAPACITIES FOR DATA/COMMUNICATION

CABLE/WIRE SIZE [In.] [mm] 20% FILL* 40% FILL**

UNSHELDED 4-pair, 24 AWG, Cat 5 0.220 [5.6] 5 11

TWISTED PAIR 4-pair, 24 AWG, Cat, 3 0.190 [4.8] 7 15

TELEPHONE 2-pair, 24 AWG 0.140 [3.6] 14 28

3-pair, 24 AWG 0.150 [3.8] 12 25

4-pair, 24 AWG 0.190 [4.8] 7 15

25-pair, 24 AWG 0.410 [10.4] 1 3

COAXIAL RG58/U 0.195 [5.0] 7 14

RG59/U 0.242 [6.1] 4 9

RG62/U 0.242 [6.1] 4 9

RG6/U 0.270 [6.9] 3 7

TWINAXIAL 100 Ohm 0.330 [8.4] 2 5

SHELDED Type 1 0.390 [9.9] 1 3

TWISTED PAIR Type 2 0.465 [11.8] 1 2

Type 3 0.245 [6.2] 4 9

AL2000 Aluminum

Surface Raceway

INSTALLATION INSTRUCTIONS

AL2000 RACEWAY WIRE FILL CAPACITIES FOR POWER

WIRE TYPE TW THW RHH/RHW THHN/THWN

POWER WIRING 6 AWG 5 5 4 8

WITHOUT DEVICE 8 AWG 9 7 5 12

1.1 sq. in. cross section 10 AWG 20 14 10 24

12 AWG 26 17 16 38

14 AWG 33 21 19 51

POWER WIRING AWG 6 AWG 3 2 2 3

WITH DEVICE 8AWG 4 3 2 6

515 amp devices 10 AWG 5 3 3 8

.8 sq. in. cross section

NOTE:* 20% cable fill is calculated to approximate reduction in cable capacity due to connectors mounted within raceway and fittings that may restrict

cross sectional area.

** 40% cable fill is the maximum designed cable fill base on a proposed revision to TIA/EIA 569-A.

Wiremold Electrical Systems conform with, and should be installed and

properly grounded in compliance with requirement of the current

National Electrical Code or codes administered by local authorities.

All electrical products may represent a possible shock or fire hazard

if improperly installed or used. Wiremold electrical products are UL list-

ed, made for interior use and should be installed by qualified

electrical people in conformance with current local and/or the

National Electrical Code.

Note: Raceway may be configured in single or multiple channels

to accommodate power or communications wiring.

MAXIMUM CROSS SECTION

1.1 sq. in.

[27mm]

1 7/16"

[37mm]

1 1/8"

[29mm]

.8 sq. in.

[20.3mm]

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Surface Raceway

AL2000 RACEWAY WIRE FILL CAPACITIES FOR DATA/COMMUNICATIONODCABLE/WIRE SIZE [In.] [mm] 20% FILL* 40% FILL**UNSHELDED 4-pair, 24 AWG, Cat 5 0.220 [5.6]

Seite 2

AL2003 MOUNTING CLIP AL2006 COVER CLIP To close any gaps. That accur from field cutting, snapAL2006 Cover Clip over joints, where two adjoining pieces

Seite 3

AL2010A FEED END FITTINGAL2010B BLANK END FITTINGAl2043 IN-LINE RECEPTACLEAL2043IG IN-LINE ISOLATED GROUND RECEPTACLEAL2040A IN-LINE SINGLE POLE SWITC

Seite 4 - [1219mm]

AL2015 TEE ELBOWAL2018 EXTERNAL ELBOWAL2015 Tee Fitting, position fitting at end of AL2000B base.Install other base section to other end of fitting. C